September 2015 Most Viewed Documents for Power Generation And Distribution

  1. Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels
    Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994)

    700

  2. Wet cooling towers: rule-of-thumb design and simulation
    Leeper, S.A. (1981)

    190

  3. Load flow analysis: Base cases, data, diagrams, and results
    Portante, E.C.; Kavicky, J.A.; VanKuiken, J.C.; Peerenboom, J.P. (1997)

    176

  4. ASPEN Plus Simulation of CO2 Recovery Process
    Charles W. White III (2003)

    154

  5. Electric power substation capital costs
    Dagle, J.E.; Brown, D.R. (1997)

    145

  6. Recovery of Water from Boiler Flue Gas Using Condensing Heat Exchangers
    Levy, Edward; Bilirgen, Harun; DuPont, John (2011)

    121

  7. Frequency Control Concerns in the North American Electric Power System
    Kirby, B.J. (2003)

    107

  8. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report
    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G. (1982)

    107

  9. Seventh Edition Fuel Cell Handbook
    NETL (2004)

    83

  10. Multilevel converters for power system applications
    Lai, J.S.; Stovall, J.P. [Oak Ridge National Lab., TN (United States)]; Peng, F.Z. [Univ. of Tennessee, Knoxville, TN (United States)]|[Oak Ridge National Lab., TN (United States)] (1995)

    77

  11. Controlled low strength materials (CLSM), reported by ACI Committee 229
    Rajendran, N. (1997)

    75

  12. Load Modeling and State Estimation Methods for Power Distribution Systems: Final Report
    Tom McDermott (2010)

    68

  13. Multilevel converters -- A new breed of power converters
    Lai, J.S. [Oak Ridge National Lab., TN (United States). Engineering Technology Div.]; Peng, F.Z. [Univ. of Tennessee, Knoxville, TN (United States)]|[Oak Ridge National Lab., TN (United States)] (1995)

    45

  14. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report
    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G. (1982)

    45

  15. Test Program for High Efficiency Gas Turbine Exhaust Diffuser
    Norris, Thomas R. (2009)

    44

  16. Durable Zinc Oxide-Based Regenerable Sorbents for Desulfurization of Syngas in a Fixed-Bed Reactor
    Siriwardane, R.V.; Cicero, D.C.; Jain, S.; Gupta, R.P.; Turk, B.S. (2002)

    40

  17. Wireless Sensor Network for Electric Transmission Line Monitoring
    Alphenaar, Bruce (2009)

    39

  18. Application of Pulse Spark Discharges for Scale Prevention and Continuous Filtration Methods in Coal-Fired Power Plant
    Cho, Young; Fridman, Alexander (2012)

    37

  19. Instantaneous reactive power and power factor of instantaneous phasors
    Hsu, J.S. (1998)

    34

  20. Micro-CHP Systems for Residential Applications
    Timothy DeValve; Benoit Olsommer (2007)

    33

Last updated on Tuesday 14 June 2016